Cisco license state not in use eula not accepted

Configure map or tunnels to the interface to trigger the EULA. Perform the following actions when required:. The following example shows the acceptance of an EULA for the software redundancy feature:. The following example shows the acceptance of an EULA for the application redundancy feature:. Cisco ONE Suites is a new way for customers to purchase infrastructure software.

Cisco ONE offers a simplified purchasing model, centered on common customer scenarios in the data center, wide area network, and local access networks.

The following example shows how to activate an suite license:. The following sections provide references related to the Call Home feature. Explains how the Smart Call Home service offers web-based access to important information on select Cisco devices and offers higher network availability, and increased operational efficiency by providing.

Smart Call Home User Guide. Smart Call Home site page on Cisco. Cisco Smart Call Home site. No new or modified standards are supported by this feature, and support for existing standards has not been modified by this feature.

No new or modified RFCs are supported by this feature, and support for existing RFCs has not been modified by this feature. The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies.

Access to most tools on the Cisco Support website requires a Cisco. Use Cisco Feature Navigator to find information about platform support and software image support.

An account on Cisco. The Call Home feature provides e-mail-based and web-based notification of critical system events. A versatile range of message formats are available for optimal compatibility with pager services, standard e-mail, or XML-based automated parsing applications.

The following commands were introduced or modified:. Skip to content Skip to search Skip to footer. Book Contents Book Contents. Find Matches in This Book. PDF - Complete Book 2. Updated: August 21, Use Cisco Feature Navigator to find information about platform support and Cisco software image support.

To access Cisco Feature Navigator, go to www. Prerequisites for RTU You must obtain the device certificate from the Cisco licensing infrastructure before you start the installation process. You must have a Cisco user login account.

The following example shows how to save identity information about a license named feat1. The following example shows how to save identity information about a license named feat2. To activate a license level on a switch, use the license right-to-use activate command.

This may be useful in scenarios where deployment is automated using install scripts. Right-to-use RTU is a licensing system that allows you to upgrade a license on your switch without interacting with the Cisco Product License Registration portal.

They can be instantly activated on any supported switch without requiring an Internet connection. The RTU license model is based on mutual trust between you and Cisco. When you apply an RTU license, it is implied that you have first purchased the license from Cisco. This agreement is explained in detail in the EULA, which is displayed when you activate the license.

Skip to content Skip to search Skip to footer. Book Contents Book Contents. Find Matches in This Book. PDF - Complete Book 2. Updated: July 11, Chapter: license accept end user agreement through request license new-udi. Chapter Contents license accept end user agreement license agent default license agent listener license agent max-sessions license agent notify license boot level license boot module license call-home install pak license call-home resend license call-home revoke license call-home url license clear license comment license expand nvram license feature license feature snasw license install license modify priority license purge license revoke license right-to-use deactivate license save license save credential license right-to-use activate Close.

L through T license accept end user agreement To accept the end-user license agreement EULA for all Cisco IOS software packages and features at one time, use the license accept end user agreement command in global configuration mode. If this configuration command is part of the start-up configuration, it implies that the EULA is accepted. Usage Guidelines By default, the license agent starts automatically when the device boots up.

Examples The following example shows how to use the default HTTP mechanism for authentication: Router config license agent default authenticate Related Commands Command Description license agent listener Configures the path that the license agent authentication monitors.

Usage Guidelines This command starts the license agent in listener mode. The range is 4 to Examples The following example shows how to limit the number of concurrent license agent sessions on a router: Router config license agent max-sessions 5 Router config exit Router show license agent session License Agent Sessions: 0 open, maximum is 5 Related Commands Command Description license agent default Configures license agent authentication.

Cisco ASR Router license boot level license-level no license boot level license-level Cisco ASR Router license boot level license-level no license boot level license-level Cisco Catalyst E Switch Platforms license boot level license-level no license boot level license-level Cisco Catalyst E Switch and Switch Stack Platforms license boot level license-level [ switch switch-num ] no license boot level license-level [ switch switch-num ] Cisco Catalyst E Switch Mixed Stack Platforms license boot level license-level switch switch-num no license boot level license-level switch switch-num Cisco Catalyst E Series Switch Platforms license boot level license-level Syntax Description license-level Level at which the switch is booted for example, ipservices.

Command Default The switch boots the configured image. Usage Guidelines Use the license boot level command for these purposes: Downgrade or upgrade licenses Enable or disable an evaluation or extension license Clear an upgrade license This command forces the licensing infrastructure to boot the configured license level instead of the license hierarchy maintained by the licensing infrastructure for a given module.

When the switch reloads, the licensing infrastructure checks the configuration in the startup configuration for any licenses. If there is a license in the configuration, the switch boots with that license. If there is no license, the licensing infrastructure follows the image hierarchy to check for licenses. If the forced boot evaluation license expires, the licensing infrastructure follows the regular hierarchy to check for licenses.

If the configured boot license is already expired, the licensing infrastructure follows the hierarchy to check for licenses. Examples The following example shows how to activate the ipbase license on the switch upon the next reload: Switch config license boot level ipbase Related Commands Command Description license install Installs a stored license file.

Command Default The router boots the configured image. Usage Guidelines Use the license boot module command for these purposes: Downgrade or upgrade licenses Enable or disable an evaluation or extension license Clear an upgrade license This command forces the licensing infrastructure to boot the configured license level instead of the license hierarchy maintained by the licensing infrastructure for a given module. If there is a license in the configuration, the router boots with that license.

Examples The following example shows how to activate the ipbase image license that is part of the group all on the ASR module at the next reboot: Router config license boot module asr group all level ipbase The following example shows how to activate the advipservices license on the cdata module at the next reboot: Router config license boot module cdata level advipservices The following example shows how to enable an evaluation license: Router config license boot module c technology-package data The following example shows how to make an evaluation license inactive: Router config no license boot module c technology-package data Related Commands Command Description license install Installs a stored license file.

Cisco , , and Series Routers, and Cisco , , and Series Integrated Services Router Platforms license call-home install pak pak-id Cisco Catalyst E Switch Platforms license call-home install pak pak-id Cisco Catalyst E Switch and Switch Stack Platforms license call-home install pak pak-id [ switch switch-num ] Cisco Catalyst E Switch Mixed Stack Platforms license call-home install pak pak-id switch switch-num Cisco Catalyst E Series Switch Platforms license call-home install pak pak-id Syntax Description pak-id A product authorization key sent through e-mail or through regular mail by manufacturing to authorize software upgrades.

Usage Guidelines The Cisco License Call Home feature allows a Cisco router to communicate with the Cisco licensing infrastructure through the Internet and retrieve licensing information.

This command requires the following: The router or switch must have an Internet connection and use HTTPS to connect to the Cisco licensing infrastructure.

You must obtain the device certificate from the Cisco licensing infrastructure. You must have a Cisco. When you issue the license call-home install pak command, these events occur: Information about the stock keeping unit SKU is displayed. SKUs map to one or more Cisco software features. You receive prompts at the command line for required fields such as an e-mail address, username, and password to access the Cisco website and SKU quantities.

The user-entered data is validated and processed, and then the license is installed on the router. If data is not validated, warning messages are displayed. Examples The following example shows the commands, prompts, and responses required to install a license by using a PAK and the Cisco License Call Home feature. The bs file system is available only on mixed Cisco E switch stacks.

The archive , pram scp , and syslog file systems are available only on router platforms. The flash n file system, where r, is an integer in the range from 1 to 9, is available only on Cisco E switches and stacks. The https file system is not available on mixed Cisco E switch stacks and the Cisco E switch. You must obtain the device certificate from the Cisco licensing infrastructure before starting.

This command initiates these actions: The device credential is retrieved from the device and sent to the Cisco licensing infrastructure. This command invokes the Cisco licensing infrastructure to request all licenses with the device credential information be sent to the device.

The Cisco licensing infrastructure provides all purchased licenses for the given UDI. This command stores all licenses in the destination URL filesystem. Examples The following example shows the commands, prompts, and responses required to request a license to be sent from the Cisco licensing infrastructure and to be stored in the requested destination file system: Router license call-home resend flash:licenseresend. Saving it to flash:licenseresend. The license call-home revoke EXEC command performs this sequence of operations: The Cisco licensing module establishes communication with the Cisco licensing infrastructure to start the rehost operation.

The request contains the source UDI. The Cisco licensing portal responds that either the target UDI is not correct or lists the stock keeping units SKUs available on the device for rehosting. The Cisco licensing infrastructure requests the permission ticket from the licensing portal by providing the SKU and the e-mail address of the user.

The Cisco licensing portal provides the permission file to the Cisco licensing infrastructure. The software uses this permission ticket file to generate the rehost ticket.

This rehost ticket is sent to the licensing back end along with the target UDI and optional e-mail address. The Cisco licensing back end generates a new license file and sends it by using the e-mail address collected in the prompts.

Examples The following example shows how to use the license call-home revoke command to revoke a license on the device with the specified UDI.

All of the above Please select the sku number you want to revoke : 3 Retrieving the permission ticket from swift! Output file saved You hereby acknowledge and agree that the product feature license is terminable and that the product feature enabled by such license may be shut down or terminated by Cisco after expiration of the applicable term of the license e.

Cisco reserves the right to terminate or shut down any such product feature electronically or by any other means available. While alerts or such messages may be provided, it is your sole responsibility to monitor your terminable usage of any product feature enabled by the license and to ensure that your systems and networks are prepared for the shut down of the product feature.

You acknowledge and agree that Cisco will not have any liability whatsoever for any damages, including, but not limited to, direct, indirect, special, or consequential damages related to any product feature being shutdown or terminated. By clicking the "accept" button or typing "yes" you are indicating you have read and agree to be bound by all the terms provided herein. Command Default Licenses are not removed. Usage Guidelines For the ASR router, the license clear command clears only image-level licenses that are not in-use.

Examples The following example shows how to display the installed licenses on an ASR router and how to clear the throughput license. Usage Guidelines This command is useful for tracking a license when multiple licenses are stored on a device, and for adding or deleting information about a specific license. The license comment command performs these operations: Verifies that the license associated with the specified feature is present in the license storage.

If there are multiple license lines, the command prompts for license line selection. If a comment exists in the license line, the command displays the comment first before prompting for a new comment. Up to 99 characters are stored in license storage. If a switch number is specified, this command is executed on the specified switch. Command Default No license storage expansion is configured. You must back up your IOS configuration before running this command.

IOS must be restarted for changes to take effect. The following response shows that the existing configuration files need compression before the licensing file system can be expanded: Error: startup-config is too large. Compress the config with "service compress-config" followed by "copy system:running-config nvram:startup-config" and rerun "licence expand nvram". The following response shows that a configuration file is still too large for the resized NVRAM: Error: cannot expand the license storage.

The following response shows that expansion cannot take place because the size of the block files is too large: Error: cannot expand the license storage. Existing block files are too large. Back up existing block files, delete them from nvram and reissue "license expand nvram". The following response indicates that this command is being issued on an already expanded NVRAM: Error: license storage already expanded to maximum size.

Related Commands Command Description service compress-config Compresses startup configuration files. Command Default The license feature is not activated. Usage Guidelines Use the license feature command to activate the specified license feature. The flash n file system, where r , is an integer in the range from 1 to 9, is available only on Cisco E switches and stacks. Command Default A license is not installed. SG This command was modified. Usage Guidelines You must have already purchased the license and obtained the license file from either the Cisco licensing portal or by using the license save EXEC command.

When the license install command is issued, these actions are initiated: The license module parses the license file and retrieves the unique device identifier UDI , license line, and license comments.

If the UDI in the license file is not local, this command passes the license line and user comments to the specified switch where the information is provided to the license security application. If the license is a trial license, this command initiates an end-user license agreement prompting you to accept it. If you do not accept the end-user license agreement, the license line installation is stopped. Upon successful completion, the application notifies you about the installation of the license.

The command displays an information message stating that the license installation is successful and whether the licensed feature is present in the current image. This message appears when duplicate licenses are detected: Installing Skipped:Duplicate On some hardware platforms, you must reload or reboot the device to make a newly installed license active.

Examples The following example shows how to install a license from the bootflash system on the Cisco ASR router. Successful:Supported Installing Usage Guidelines This command adjusts the priority of a license.

Command Default Licenses are retained. Usage Guidelines Use this command to remove licenses that are not associated with the current chassis UDI. Examples The following example shows how to purge unneeded licenses: Switch license purge Are you sure you want to purge licenses? Usage Guidelines The license revoke command removes the original, permanent license from the device and provides a license for the new device by accomplishing these operations: Obtains a permission ticket from the Cisco licensing infrastructure portal that allows the license to be moved.

Parses the permission ticket file to extract data related to generating the rehosting ticket. Uploads the rehost ticket to the Cisco licensing infrastructure portal so you can obtain the final license. License Count: Non-Counted. Could you please try the following command and update me the result I will try it thnx!

Buy or Renew. Find A Community. Cisco Community. Thank you for your support! We're happy to announce that we met our goal for the Community Helping Community campaign! Turn on suggestions. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.

Showing results for. Search instead for. Did you mean:. All Community This category This board. EULA not accepted in Core. Labels: Labels: Other Switching. I have this problem too. All forum topics Previous Topic Next Topic. Accepted Solutions. InayathUlla Sharieff. Cisco Employee.