Kdc-mp239 manual

A volume above 80 decibels can be harmful to hearing. When the volume exceeds decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration. My car radio does not turn on, now what? If your car radio does not turn on, it will not receive any power.

Check that the red wire is connected to the contact power supply and the yellow wire to the constant power supply. How can I best clean my Car Radio? A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air. What is bluetooth? Therefore, what appears on the display in the. This unit may not correctly play discs which do not.

For the finalization process refer to your. RW recorder instruction manual. When the power is on, the source switches between. Press at least 1 second to turn off the power.

BB-L" each time this button is pressed. Releases the faceplate lock so that it can be removed. Refer to the following diagram when reattaching the. Connect a portable audio device with mini-plug cable. Muting volume upon reception of phone call. When there is a call, "CALL" is displayed and the audio. When the call ends, "CALL" disappears and the audio. The audio system comes back on when [SRC] is. Switches to AM when the bottom side is pressed. Changes the frequency when the left or right side is.

Switches as follows each time this button is pressed. Automatic search for a station. Search in order of the stations in the. Memorize the station selected when pressing for at. Memorizes six stations with good reception. The functions you can use and the information that can be displayed may differ depending on the models being connected.

Lens Fogging When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. Safety precautions. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable.

The unit returns to factory settings when the Reset button is pressed. Normal operation should be restored. Reset button Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters.

Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth. Before using this unit for the first time This unit is initially set on the Demonstration mode. Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device.

On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well. This unit may not correctly play discs which do not have the mark. Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best. Record the serial number, found on the back of the unit, in the spaces designated on the. Refer to the model and serial numbers.

Register your Kenwood product at. Auxiliary Input Display Setting.